Siltec cable trays excel in food and beverage environments due to their stainless steel construction (AISI 304/316), which resists corrosion and withstands harsh conditions while maintaining hygienic standards. Their open design allows easy access for cleaning and inspection, critical for compliance with stringent food safety regulations. Additionally, the trays enable flexible cable management, permitting future adjustments without disassembly, and their durable materials minimize dust accumulation, reducing contamination risks.

Standard cable tray

Cable trays with lock

COMPACT cable trays

Cable trays Heavy duty

Cable trays for Cable separation

Cable trays Single cable

Siltec’s fittings for food production environments prioritize hygiene compliance and durability, featuring metal-detectable cable separation clamps that eliminate single-use plastics while ensuring safety in food safety zones.

Their CableSeparation trays (e.g., S810, S820) allow layered cable organization with locking mechanisms to prevent movement, critical for complex machinery in food facilities. Constructed from 304/316 stainless steel, these fittings resist corrosion in harsh conditions and maintain smooth surfaces for easy cleaning.

Additionally, EHEDG certification ensures adherence to stringent hygienic standards, validated through open designs that prevent debris accumulation. Customizable tray sizes and configurations further support tailored installations in food processing environments.

Cable trays with a lock allow fast cable installation and exchange. At the same time, the cable trays are flexible and the cables are easily accessible during cleaning and inspection.

Cable trays from SILTEC are made of first-class stainless steel that prevents corrosion and ensures a good level of resistance.

Binder offers a wide range of connectors suitable for used in the food and beverage industry, including 7/8” connectors and M8 and M12 stainless-steel connectors. Binder offers tested products that are Ecolab and FDA compliant and developed specifically for this industry:

• Ecolab and FDA Compliant

• IP68 and IP69K rating

• Special TPE cable

• Washdown resistant

• Extended temperature range –40 °C up to +105 °C

• Corrosion-free stainless steel screw connection

• Easy to clean surface

Connectors for harsh environments of the HEC series 696 (Harsh Environment Connectors) are available as square flange and cable versions with integrated protective conduit, which can protect cables up to IP67 and when mated up to IP69K. The connectors are UV-resistant and have VDE and UL approval. The high mechanical load capacity of the products is confirmed by more than 500 mating cycles for the 12-pole version and more than 1000 mating cycles for the 5- and 8-pole versions.

To ensure stable and economical production and packaging processes, the sensors used in the system must function reliably and be available in the long term. In hygiene-sensitive or wet environments, as well as in a harsh production environment, sensors in stainless steel housings are the perfect choice. They are characterized by high resistance to moisture, cleaning agents, temperature fluctuations, dust, chips or vibrations, as well as mechanical loads. 

Discover our new sensor portfolio of the 33C series in hygienic design and the 35C series in robust wash-down design. The two full series in stainless steel housings with photoelectric proximity sensors, through-beam and retro-reflective photoelectric sensors also include many specialized sensors for particularly demanding applications. With the extensive portfolio with different light sources (Power PinPoint LED, laser, infrared), light spot geometries and connection types, applications in packaging systems, in machine tools or in the automotive industry can be solved reliably and economically.

The GSX fork sensor is the world's first sensor of its kind and combines the two detection methods of ultrasonics and light in a single housing. It brings together the advantages of both principles and can be used very flexibly. It reliably, quickly, and precisely detects a wide range of labels, regardless of their material and surface characteristics. Even labels made of inhomogeneous cavitated BOPP material can be reliably detected through the optical operating principle. The fork sensor is thus especially suitable for applications where a wide range of labels need to be detected, which, in the past, frequently required the use of multiple different sensors.
 

Universal use for the detection of all types of label materials.

The user saves not only space, but also additional time and costs of installation.

Perfect for labeling machines that are operated with various label types.

The MLC 500-IP safety light curtains safeguard points of operation in hygiene-sensitive areas of food processing and have the highest degree of protection IP 69K. For this purpose, the light curtains are mounted in a transparent and encapsulated tube. Different resolutions and protective field lengths offer optimal adaptation to the application.

Extremely robust, all stainless steel sensors: Leuze’s all stainless steel sensors made of up to 1 mm thick V2A/V4A stainless steel are designed for use in environments with the highest requirements on the housing material. IP68/69K, pressure resistance and up to 3x switching distance are just a few of the technical features of this series.

Furthermore, variants are available for the food and beverage sector with ECOLAB certification.

Bearing free: no rotating mechanical connection, touchless detection (thus wear-and-tear free). Enclosed electronics - maximum IP69k.

Solid shaft with proven double bearing. Encoder is driven by shaft. Attachment with flange clamps, brackets or flange sided threads.

Extremely tight: up to IP69k with solid shaft or bearing free.

100% stainless steel housing option for aggressive surroundings.

Innovative housing in “Washdown Design” - easy to clean, EHEDG certified.

Two stainless-steel housings for use in the food and pharmaceutical industry

PTFE membrane for protection against aggressive media

Sealed against the housing with an O-ring made from FKM, providing the highest possible chemical resistance.

ECOLAB certified and FDA-compliant materials

IO-Link interface

UL Listed to Canadian and US safety standards

Stainless steel 1.4404, AISI 316L is designed for use in aggressive environments.

The surface is smooth, as status information and reset function are integrated into the software and the nameplate data is permanently lasered into the stainless steel surface.

The uniform connector connection is located on the side away from the shaft and a simplified flange/shaft geometry minimizes the contact surface for liquids and dusts.

Available with a degree of protection up to IP 67

Ethernet, PROFINET, EtherCAT, Ethernet/IP

MENNEKES IEC 60309 pin and sleeve wiring devices provide secure, reliable connections that stand up to punishing conditions. Our full lineup of receptacles, plugs, connectors and inlets endures rigorous testing at our lab, and carries numerous compliance ratings including UL Type 4X Watertight with UV Stabilized Materials and flame class ratings per UL 94V-0. Since MENNEKES pin and sleeve wiring devices are IEC 60309-1 compatible, they are fully intermateable with like-rated devices from other manufacturers to support universal installation requirements.

MENNEKES switched and interlocked receptacles combine safety and durability in one pre-wired unit. A patented interlock mechanism prevents the switch from being turned “ON” unless the plug is fully inserted, and it stops removal unless the switch is in the “OFF” position. They feature a tough, thermoplastic NEMA 4X; 12 enclosure with poured-in-place gasketing and molded conduit drillpoints to stand up to chemicals and impact. Our full lineup of switched and interlocked receptacles includes IEC 60309-compliant and UL 1686 C1-type versions as well as our stainless steel SPEC series for demanding washdown environments.

MENNEKES® introduces the industry’s first non-metallic, curved-top, disconnect switch. This innovative design incorporates MENNEKES’ quality in an enclosure that sheds water to address food industry sanitation concerns.

Rated 30A and up to 25HP, the CDS Series can satisfy most line disconnect requirements. The ultimate watertight seal is achieved in a cULus Listed, UL Type 4X; 12, IP69K and NSF Certified enclosure. Laser markings and curved profile eliminate standing water, minimizing contaminants.

Murrplastic offers custom “on-demand” and “off-the-shelf “ solutions for cables with or without connectors. Stainless Steel and non-metallic versions for every application and budget.

FDA compliant

Up to IP69K rated

Hygienic Design

Options to fit in standard Rittal cut-outs

The HygienicLine Dynamics retraction system is manufactured in Hygienic Design and was specially developed for hygienically sensitive industries.

The use of electro-polished stainless steel and high-performance plastics makes the surface even smoother and ensures an abrasion-resistant application.

Further advantages:

• Easy cleaning without dirt edges due to Hygienic Design

• Resistance to acids and alkaline

• Use of FDA compliant and detectable material

• System meets the requirements of EG 1935/2004, EG 10/2011 and EG 2023/2006

• Resistance to high temperatures and pressures

• High quality due to the use of stainless steel

• Easy handling and minimization of assembly errors

• Subsequent assembly and disassembly of cables and wires possible

• Good torsional stability and high dynamics ensure longer service life of all components

One economical crystal clear laser printer for all of your labeling requirements including terminal blocks, wire, cable, conduit labels & sleeves, adhesive, device & equipment labels with no consumables!

• Polycarbonate labels

• Polypropylene labels

• Anodized aluminium

• Stainless Steel

• Laser foils

Thanks to the use of AISI 316L stainless steel and to the accurate surface finish, this new range of devices is ideal for food and beverage applications.

• AISI 316L stainless steel housing

• Protection degree IP67 and IP69K

• Intervention point 1.5° adjustable ± 1°

• M12 or cable out versions available

HX series stainless steel safety switches are available both with mechanical and electronic contact blocks.

This switch offers all the well-established features of the Pizzato brand, such as the RFID technology installed in the actuator and the highest guaranteed safety levels PL e and SIL 3, thereby providing a high degree of safety. 

• Metal head and technopolymer body

• Illuminated cap provides fast diagnosis of operational state 

• Easy mounting using just two M5 screws

• Auxiliary release via hexagonal key 

• Actuator can be rotated 90° 

• Jointed actuator for inaccurately closing guards 

• IP 67 & IP69K

By connecting to the IO-Link master, the BN control device unit can exchange essential data on the surrounding environment, providing detailed information on the different operating phases.
The data sent includes the state of the buttons and different device types, the LED state, the supply voltage, the device utilisation time and temperature.

One key feature of the BN series IO-Link control device unit is its ability to detect any out-of-range values in the monitored data. The system can detect any anomalies or potential risks so that the operators can quickly adopt the necessary measures.

What’s more, with IO-Link technology all the data on the device can be displayed in real time, which means immediate monitoring and precise performance.

Its all-aluminum enclosure provides rugged durability and resistance to extreme temperatures and harsh conditions.

The Xpanel nXT series is UL Class 1 Div 2 certified and UL listed for type 4X and type 12, making it suitable for use in hazardous locations. In addition, its front panel is IP68 rated for protection against dust and water ingress, and its rear panel is IP20 rated.

A sunlight readable display, with up to 1000 nits of brightness, makes the Xpanel nXT series perfect for outdoor applications. This allows for clear visibility even in bright ambient lighting, ensuring that operators can always see important information and make accurate decisions.

The capacitive touch interface of the Xpanel nXT series is intuitive and easy to use, providing a smooth and responsive user experience. With a wide temperature range of -20 to 65 degrees Celsius, you can use it in any environment.

• Stainless Steel – AISA 316 (V4A)
• Condensate evaporation
• Coated condenser and evaporator coils
• Integrated heater
• Protected copper tubing
• RS-485 Modbus interface included
• Protected programmable controller
• Chemical and salt spray resistance
• Operating temperature from -40°F to 140°F
• Protection class IP56 / Type 3R, 4X

Seifert’s line of thermoelectric enclosure coolers are designed to mount in virtually any position and especially in smaller cabinets. The thermoelectric elements create a temperature difference between the internal and ambient heat sinks, making internal air cooler while dissipating heat into the external environment. Fans help the transfer of convective heat from the heat sinks, which are optimized for maximum flow.

Our thermoelectric coolers are available in stainless steel 304 or 316 housing. They can be mounted in nearly every position (except roof mounting) because they do not have a compressor and have no moving parts. Depending on the mounting situation the condensation management may need to be considered and possibly adjusted. Seifert thermoelectric coolers can be ordered as recessed or external (with frame) versions. Seifert thermoelectric coolers are UL recognized and CE rated.

For more information on our line of Thermoelectric Coolers, download the brochure.

Stainless Steel - 304 finish

Ingress Protection: IP56

Available in four sizes