The RSL 200 safety laser scanners are optimized for minimum space requirements. With a height of just 80 mm and a footprint of 80 x 86 mm, they offer a range of 3.00 m and a 275° scanning angle. This makes them particularly suitable for use on AGVs and AMRs, but also for area guarding and restart protection for compact machines. Up to 32 protective field sets enable adjustments to the environment, load and speed. These adjustments can be optimized even further with the sets consisting of 2 warning and one protective field. Clever details such as rotatable connections, an optimized mounting bracket and the diagnostics app ensure simple integration and efficient safety.

The world's first safe 3D radar system, LBK, was developed for the monitoring of hazardous areas in harsh industrial environments. It detects the bodies of persons and in doing so monitors the protected area for access and presence. Using the controller, up to 6 sensors can be combined.

Advantages for you:

Reliable operation, even under harsh ambient conditions with, e.g., dirt, dust, smoke, and light

Flexible adaptation of the protected area to the application: determine the number and position of the sensors, configure the length and opening angle/width of the area.

Static objects in the protective field are permissible and do not result in shutdown of the safety outputs

Fast integration due to simple system design and controller with PROFIsafe or FSoE interface

Advantages for you

• The high angular resolution positions automated guided vehicles (AGVs) very precisely.

• High scanning frequency of 80 Hz reliably detects fast-moving objects.

• Predictive maintenance through window monitoring: Integrated window monitoring allows soiling to be detected quickly, and high system availability can be achieved through predictive maintenance.

• Excellent integration due to compact design: At 80 x 80 x 80 mm, the laser scanner's compact size allows it to fit into the smallest installation spaces in AGVs.

• Can be used in high and low-temperature ranges: Whether for deep-freeze storage or applications with increased temperature requirements, such as in the battery manufacturing environment, the ROD 300/500 can be used from -30°C to 60°C.

Robust design: The new ROD 300/500 laser scanner has a strong design thanks to its IP67 protection class, high-quality aluminum base, and built-in 905 nm laser diode.tion goes here

Our safety light curtains are used wherever people and machines work "hand-in-hand." They ensure reliable safety – for finger and hand protection to safeguard points of operation or for access guarding at danger zones.

At the same time, the devices meet the highest requirements with regard to easy integration and the availability of safeguarded systems.

The ELC 100 and MLC 500 safety light curtains offer high resolutions for short safety distances and a compact system design. If there is sufficient space, the MLD 500 multiple light beam safety devices are used. These are optionally available with integrated muting functions.

MLC SERIES MADE IN USA

Maximum technology in the minimum volume:
The smallest RFID safety switch with lock in the world

This switch offers all the well-established features of the Pizzato brand, such as the RFID technology installed in the actuator and the highest guaranteed safety levels PL e and SIL 3, thereby providing a high degree of safety. 

A distinctive feature of the NX switch is the illuminated cap positioned on the head of the device, allowing the operator to quickly and immediately diagnose the functional states of inputs and outputs with the help of the incorporated RGB LEDs.

The new NS series safety device with integrated reset function was developed with the goal of combining the manual reset of the interlocking function with an RFID safety device with lock in a single product.

The use of the NS series switches with integrated reset function has the advantage that the interlocking function can be reset directly on the device. Its safety outputs are only activated if the actuator is inserted and locked, and only following a manual acknowledgement on the device's reset input, the so-called acknowledgement input.

By connecting to the IO-Link master, the BN control device unit can exchange essential data on the surrounding environment, providing detailed information on the different operating phases.
The data sent includes the state of the buttons and different device types, the LED state, the supply voltage, the device utilisation time and temperature.

One key feature of the BN series IO-Link control device unit is its ability to detect any out-of-range values in the monitored data. The system can detect any anomalies or potential risks so that the operators can quickly adopt the necessary measures.

What’s more, with IO-Link technology all the data on the device can be displayed in real time, which means immediate monitoring and precise performance.

M16 IP40 Product details

M16 IP67 Product details

M16-X Product details

M8 Product details

M12-A Product details

M12-B Product details

M12-D Product details

M12-K Product details

M12-L Product details

M12-S Product details

M12-T Product details

RJ45 Product details

DIN 43650 (Solenoid Valve Connectors)

Model A Product details

*List is representative only - many other options available

Subminiature connectors

Miniature connectors

Power connectors

Connectors for medical applications

Automation technology - Sensors and actuators

Automation technology - Data transmission

Automation technology - Voltage and Power Supply

Automation technology - Solenoid valve connectors

Bayonet quick locking for a time saving connection.

Compact design: power supply for your system or drive unit even in confined spaces.

Degree of ptotection IP68 and IP69K for permanent submersion and high-pressure cleaning.

Hybrid version for simultaneous power supply and signal transmission with only one plug-in.

Industrial Control, Electronic, Actuator sensor, BUS, Network, Motor, VFD and Servo Cables

Our rugged, industrial cables are designed for harsh environments. We provide you with the right solution for your power, control or data applications.

LUTZE specializes in flexible and continuous flexing industrial control, power and network cables, such as LUTZE SILFLEX®, LUTZE SUPERFLEX®, MOTIONFLEX® and DRIVEFLEX® VFD cables, for various applications in industrial automation.

Pre-assembled SUPERFLEX® Plus high-performance flexing cable with a polyurethane jacket, built to work with existing servo drive systems - Bosch Rexroth®, Allen-Bradley® Standard 2090 and Siemens® 6FX.

Compatible with any system using the HIPERFACE DSL interface and tested by the original interface supplier. Low cable capacitance and small ODs mean better performance and increased uptime.

LUTZE provides components and solutions for the Industrial Internet of Things (IIoT) to integrate into your applications and to enhance the safety and efficiency of your application.

We work with a range of non metallic material types, from Polyamide (PA6, PA12, PA66), Polypropylene (PP) and PVC and can offer over 27 systems in a range of sizes from 7mm to 106mm.

Flexicon can offer both corrugated conduits and smooth bore spiral helically reinforced conduits, offering you the choice depending on your application.

We work with a range of material types including Galvanised Steel and Stainless Steel, and have developed composite solutions to enhance performance properties to suit technically demanding applications. Our Metallic Offer features over 35 systems, in a range of sizes from 10mm to 75mm.

Flexicon manufacture a range of helically wound conduits, with and without coatings, liquid tight conduits, pliable galvanised steel corrugated conduits and annularly corrugated conduits. Metallic systems can also be combined with overbraids to create composite solutions when required.

Puls decentralized FIEPOS power supplies with high protection classes IP54, IP65 and IP67 were developed for flexible use directly in the field.

Various versions are available from stock – including current-limited outputs for selective current distribution, a variety of plug connectors, IO-Link as a communication interface, and decoupling MOSFETs for developing redundant systems

DIN-rail power supplies with integrated decoupling function, which means that users can build 1+1 and n+1 redundancy systems without additional redundancy modules. This results in significant space and cost savings, and reduces also the complexity of the redundancy systems.

PULS new products are now available: Explore PULS's expanding portfolio of smart power supplies featuring integrated communication interfaces. Our latest innovations offer advanced connectivity for industrial automation systems, enabling seamless data exchange and enhanced control.

• CP10.241-ETC | 240 W, 24 V, 10 A, EtherCAT-interface

• CP20.241-ETC | 480 W, 24 V, 20 A, EtherCAT-Interface

• CP20.481-ETC | 480 W, 48 V, 10 A, EtherCAT-Interface

• CP20.242-IOL | 480 W, 24 V, 20 A, IO-Link-Interface

Learn more about power supplies with EtherCAT. 

Efficient, compact and reliable DC-UPS from PULS ensure highest system availability. Our uninterruptible power supplies are available with capacitor storage or VRLA batteries.

The DC-UPS with integrated electrochemical double layer capacitors are fully maintenance free and guarantee an uninterrupted power supply for periods measured in seconds.

The DC-UPS with external VRLA batteries feature the PULS' 1-Battery-Concept: This means each battery is individually charged and monitored, which avoids the need for matched batteries and ensures longest battery life.

The PISA multi-channel electronic circuit breakers with DIN rail mounting are designed for current distribution and protection of DC 24 V load circuits.

The PISA electronic circuit breakers distribute the current of large power sources to multiple lower current output channels and therefore allow for smaller wires to be used.

In the event of a fault, the electronic circuit breaker reliably switches off the channels and protects the loads.

Heavy Duty Connectors (HDC) are industrial connectors with solid aluminum or thermoplastic hoods and housings (IP65 up to IP69k). From 10A to 650A with up to 288 contacts.

RJ45 connectors are specifically designed to terminate Ethernet cables and connect into computers, routers, LANs, and other types of data communications equipment. RJ45s (a type of registered jack interconnect) are a popular type of twisted-pair connector engineered with eight positions and eight contacts (8P8C). Our portfolio features RJ45 connectors manufactured in multiple port and single port configurations with jack and plug modular connector styles. These parts are available in ganged and stacked multiple port configurations and shielded and non-shielded versions. We manufacture Cat 5e connectors, Cat 6 connectors, and Cat 6a connectors among other types of Ethernet RJ45 solutions

Terminal Blocks including Screw Clamp, Spring Clamp, Push-In, Insulation Displacement (IDC) Pluggable, Power, Mini, Distribution and ATEX.

Features

PVC & Halogen Free ranges​

Widths : 25/40/60/80/100/120 mm ​

Heights : 30/40/60/80/100 mm​

Flame-retardant, self-extinguishing according to UL94-V0 & low smoke versions​

Smooth, burr-free edges protect installers from injury and wires from damage​

WIRING DUCTS & COVERS

WIRING DUCT ACCESSORIES

WIRING DUCT TOOLS